What the Ultralight Conversion Kit actually changes
The Travel Tripod Ultralight Conversion Kit is a small set of three lightweight, rugged plastic foot plugs. They replace the lower four leg sections on your Travel Tripod, leaving you with a tabletop-sized tripod that is half the weight of the full setup. According to the product record, the converted tripod still deploys to 57.2 cm (22.5 in).
This is a purpose-built accessory for backpacking and other times when weight is the priority. It works with both carbon and aluminum Peak Design Travel Tripod models. The tripod itself is sold separately.
How to install the foot plugs
The supplied information confirms the process is fast, easy, and requires no tools. It does not provide a step-by-step sequence beyond that, so treat the following as a planning outline rather than a verbatim instruction. Peak Design also references a video on Travel Tripod accessories and installation; consult that for visual guidance.
- Remove the lower four leg sections: The kit is designed to replace these sections. The record does not specify a removal method, so check your tripod's existing leg-lock mechanism before forcing anything.
- Install the three foot plugs: Each plug takes the place of a removed leg section. No tools are required per the supplied care and compatibility evidence.
- Confirm the converted height: With the plugs in place, the tripod deploys to 57.2 cm (22.5 in). That is the working height to plan around for low-angle or tabletop shots.
Kit contents and compatibility at a glance
- Travel Tripod | Ultralight Conversion Kit: Contains 3 lightweight rugged plastic foot plugs that install in place of the lower 4 tripod leg sections. Three plugs match the Travel Tripod's three-leg design, so you are not buying a generic set.

Travel Tripod | Ultralight Conversion Kit - Travel Tripod | Ultralight Conversion Kit: Works with both carbon and aluminum Peak Design Travel Tripod models. You can use the same kit regardless of which Travel Tripod material you own.
- Travel Tripod | Ultralight Conversion Kit: With leg sections removed and foot plugs installed, the tripod is half the weight and still deploys to 57.2 cm (22.5 in). This is the core tradeoff: less weight and lower height, with a confirmed working height to plan around.
What the conversion does not tell you
The supplied information does not state the exact weight of the converted tripod, the weight of the kit itself, or a maximum load capacity for the converted setup. It also does not describe how the foot plugs attach beyond saying they install in place of the lower leg sections. If those numbers matter for your hike, verify them before you rely on the conversion for a specific camera and lens combination.
The record also does not confirm whether the removed leg sections can be reinstalled later, or whether the conversion is intended to be permanent. Treat it as a reversible experiment only if you are comfortable checking that yourself.
When the conversion makes sense for hiking
- You want a lightweight tripod for hiking: The kit's stated purpose is backpacking and times when weight is of the essence. Halving the tripod's weight is the main benefit.
- You mostly shoot low or tabletop: The converted tripod deploys to 57.2 cm (22.5 in). If your compositions need eye-level height, the standard Travel Tripod configuration is the better fit.
- You already own a Travel Tripod: The kit is an accessory, not a standalone tripod. It is only useful if you have a compatible carbon or aluminum Travel Tripod.
A practical checkpoint before you commit
Before removing any leg sections, decide what height you actually need for the shots you plan to take. The 57.2 cm (22.5 in) deployed height is the confirmed figure, so measure that against your typical framing. If it works, the installation itself is tool-free and quick per the supplied evidence. If you need more height, keep the full Travel Tripod configuration and skip the conversion for that trip.


