Back to Blog
How-to Guides 2026-11-15 Peak Design 0 views

Mobile Creator Kit Mounting Bases: How to Choose and Swap Them

Mobile Creator Kit Mounting Bases: How to Choose and Swap Them

Learn how to choose between the 1/4-20 and Arca mounting plates in the Mobile Creator Kit Mounting Bases and swap them cleanly when your setup changes.

Start with the base you need, not the one that is attached

The Mobile Creator Kit Mounting Bases exist so you can change the connection point on your kit without replacing the whole mount. The set includes a 1/4-20 mounting plate and an Arca mounting plate, plus a replacement thumb screw. Your first decision is simply which plate matches the tripod, clamp, or support you plan to use.

This is a replacement-parts decision, not a universal adapter decision. The supplied information confirms what is in the set and that these are replacement base plates for the Peak Design Mobile Creator Kit. It does not confirm compatibility with other brands or with every tripod head, so check your own support before you swap.

1/4-20 plate vs Arca plate: what each one is for

Both plates are included, so the choice is about the support you already own or plan to use.

  • 1/4-20 mounting plate: Use this when your support has a standard 1/4-20 threaded stud or screw connection. The supplied record names the plate by its thread size; it does not list a torque specification or installation sequence, so follow the support manufacturer's instructions for tightening.
  • Arca mounting plate: Use this when your support uses an Arca-style clamp. The record confirms an Arca mounting plate is included but does not state a specific clamp model or plate dimensions, so verify that your clamp accepts the plate before relying on it.

How to swap the mounting base on your Mobile Creator Kit

The supplied record confirms the parts, not a step-by-step manufacturer procedure. The sequence below is a practical way to approach the swap while keeping the parts accounted for; where the record is silent, the step says so.

  1. Identify the plate you need: Choose the 1/4-20 plate or the Arca plate based on the support you will attach to. If you are unsure which connection your support uses, check the support first rather than guessing.
  2. Remove the current base: The set includes a replacement thumb screw, which indicates the base is secured with a thumb screw. The supplied information does not describe the removal direction or any locking mechanism, so work gently and keep the screw with the base you remove.
  3. Fit the replacement plate: Seat the chosen plate in place of the removed one. The record does not include alignment marks or a tightening order, so do not force anything; if the plate does not sit flush, stop and recheck that you have the correct plate for your support.
  4. Secure with the thumb screw: Use the included replacement thumb screw to secure the plate. The record does not state how tight the screw should be, so tighten by hand until the plate is held firmly and check the connection before mounting your phone.
  5. Test before you trust it: Attach the kit to your support and check that the plate is seated and the screw is engaged before adding your phone. The supplied information does not include a load rating or a drop test, so treat this as a basic security check, not a guarantee.

What the Mobile Creator Kit Mounting Bases set contains

  • Mobile Creator Kit Mounting Bases: Replacement base plates for the Peak Design Mobile Creator Kit, including a 1/4-20 mounting plate, an Arca mounting plate, and a replacement thumb screw. Knowing exactly what is in the set tells you whether you can replace a lost or worn base without buying a whole new kit.
    Mobile Creator Kit Mounting Bases
    Mobile Creator Kit Mounting Bases
  • Mobile Creator Kit Mounting Bases: Catalog price is USD 7.16, with a catalog comparison price of USD 9.95. This is a low-cost replacement part, which makes it practical to keep a spare plate on hand for a second support.

Checks before you swap mounting bases

A few checks prevent the most common mismatch problems. These are based on what the supplied record confirms and what it leaves open.

  • Confirm your support connection: Match the plate to your support: 1/4-20 threaded connection or Arca-style clamp. The record does not confirm compatibility with other mounting systems.
  • Keep the thumb screw with the plate: The set includes one replacement thumb screw. If you swap plates often, store the unused plate and screw together so you do not lose the small part.
  • Do not assume a torque value: The supplied information gives no tightening specification. Hand-tighten and check security rather than applying a guessed force.
  • Check for wear on the base: If a base no longer holds securely, replacing it with a fresh plate from this set is the supported fix. The record does not describe wear limits, so use your judgment and stop using a base that feels loose.

When swapping bases is the right move, and when it is not

Swap bases when you are moving between a 1/4-20 support and an Arca support, or when the base on your kit is damaged or missing. Because the set includes both plates, one purchase covers both connection types for the Mobile Creator Kit.

Do not treat this set as a way to make the Mobile Creator Kit fit a support it was not designed for. The supplied record does not confirm compatibility with non-Peak Design kits or with every clamp and head. If your support uses a different connection standard, this set is not the confirmed solution. Also note that the record does not list plate dimensions, so check clearance on compact clamps before you rely on the Arca plate.

Related Articles

Customer Service
Home
Products
Cart
Profile