Anchor Links: What They Are and How to Use Them
By Peak Design | Published: 2026-10-26
Category: How-to Guides
Learn what Anchor Links are, how they attach to your camera strap, and practical ways to use them for quick, secure connections.
Quick Answer
Anchor Links are quick-connectors that attach to the ends of a standard camera neck strap, letting you snap the strap on and off your camera in seconds without threading.
Why Use Anchor Links Instead of Standard Straps?
Standard camera straps usually require you to thread the strap end through the camera's lug, which can be slow and awkward, especially if you switch between a neck strap and a wrist strap or a Peak Design Capture clip. Anchor Links solve this by adding a small, secure quick-release connector to the strap end, so you can attach or detach the strap with one hand.
What Anchor Links Are Not
Anchor Links are not the same as the metal loops or split rings that come with many camera straps. They are purpose-built connectors designed to work with Peak Design's Anchor system, but they can also be used with third-party straps that have standard-width webbing. They do not add any length to the strap—they simply replace the strap's existing attachment hardware.
Frequently Asked Questions
- How do I install Anchor Links on my camera strap?
- Slide the strap's existing webbing through the slot on the Anchor Link, then fold the strap back and secure it with the included locking clip. Make sure the clip is fully seated and the webbing is snug.
- Will Anchor Links work with any camera strap?
- They work with most standard camera neck straps that have webbing up to about 1.5 cm wide. Straps with very thick or rigid ends may not fit through the slot. Check your strap's webbing width before buying.
- Can I use Anchor Links with Peak Design straps?
- Yes, Anchor Links are designed to be compatible with Peak Design's Anchor system, so they work seamlessly with Peak Design straps that already have Anchor connectors.
- Are Anchor Links secure enough for heavy gear?
- Yes, they are built with a locking mechanism that keeps the connector closed until you intentionally press the release button. They are rated to hold several times the weight of a typical camera setup.
Product Facts
- Anchor Links: Anchor Links are quick-connectors that can be placed on the ends of any standard camera neck strap, giving it super-fast, ultra secure quick-connection. This means you can keep your favorite strap and upgrade it with a fast, secure connection system instead of buying a whole new strap.
Anchor Links
