How to Replace Your Tripod Ball Head Screw Set

Quick answer

To replace the screw set on your Peak Design Travel Tripod ball head, remove the old screws, insert the new 2.5mm screws, and tighten them securely. This guide walks you through each step and highlights common pitfalls.

Step-by-step replacement process

1. Prepare your workspace: Lay out your tripod on a clean, flat surface. Have the new 2.5mm screw set and a small screwdriver ready. Ensure good lighting to see the tiny screws. Use a magnetic tray to avoid losing screws.
2. Remove the old screws: Carefully unscrew each old screw from the ball head. Keep them aside in case you need to compare sizes. Do not force screws that are stuck; apply gentle pressure. If a screw is stripped, use a rubber band for extra grip.
3. Insert the new screws: Place the new 2.5mm screws into the holes and hand-tighten them first to avoid cross-threading. Then use the screwdriver to snug them down. Do not over-tighten; snug is enough to avoid damaging the threads.
4. Test the ball head: Attach your camera or a dummy plate and check that the ball head moves smoothly and holds position. Re-tighten any screws that feel loose. If movement is stiff, loosen slightly and re-test.

Product spotlight

• Travel Tripod | Ball Head 2.5mm Screw Set: This Peak Design replacement part is a 2.5mm screw set for the Travel Tripod ball head. It ensures you have the correct size and type of screws to keep your ball head securely assembled.