What the Tilt Mod Does for Your Tripod
The Peak Design Pro Tripod | Tilt Mod is a compact accessory that instantly converts your Pro, Pro Tall, or Pro Lite Tripod ball head into a fully functional fluid pan/tilt head. This means you can capture ultra-smooth, pro-quality video without needing a separate video tripod head. The Tilt Mod is small enough to fit in a single lens compartment in your camera bag, making it an easy addition to your kit.
Tilt Mod at a Glance
- Pro Tripod | Tilt Mod: Tilt Mod instantly converts your Peak Design Pro, Pro Tall, or Pro Lite Tripod ball head into a fully-functional and buttery-smooth fluid pan/tilt head for capturing ultra-smooth pro-quality video. This means you don't need to buy a separate video tripod head; the Tilt Mod adds fluid pan/tilt capability to your existing Peak Design tripod.

Pro Tripod | Tilt Mod - Pro Tripod | Tilt Mod: The accessory is small enough to fit in a single lens compartment in your camera bag. Portability is key for travel and field work; you can carry the Tilt Mod without sacrificing space for other gear.
How to Attach the Tilt Mod to Your Tripod
The Tilt Mod is designed to work with specific Peak Design tripod models. Before you begin, ensure your tripod is one of the following: Pro Tripod, Pro Tall Tripod, or Pro Lite Tripod. The ball head on these tripods is compatible with the Tilt Mod's mounting system.
- 1. Remove the existing ball head plate: If your tripod has a camera plate attached, remove it to expose the ball head's mounting surface.
- 2. Align the Tilt Mod with the ball head: Position the Tilt Mod so its base aligns with the ball head's mounting interface. The Tilt Mod should sit flush against the ball head.
- 3. Secure the Tilt Mod in place: Use the tripod's existing locking mechanism to secure the Tilt Mod. The exact method depends on your tripod model; refer to your tripod's instructions for locking the ball head accessory.
- 4. Attach your camera: Mount your camera onto the Tilt Mod's plate using the standard Arca-Swiss compatible clamp. Ensure the camera is balanced and the plate is tightened securely.
Tips for Smooth Operation
The Tilt Mod provides fluid pan and tilt movements, but achieving smooth video requires some practice. Start by adjusting the tension knobs (if available) to match your camera's weight. A heavier camera may need more tension to prevent unwanted movement. For best results, use a slow, steady motion when panning or tilting. The Tilt Mod is designed for pro-quality video, so take your time to get comfortable with the controls.
What the Supplied Information Does Not Cover
The available product details do not include specific tension adjustment instructions or recommended camera weight limits for the Tilt Mod. For these details, refer to the manufacturer's full documentation or contact Peak Design support. The Tilt Mod is compatible only with the Pro, Pro Tall, and Pro Lite tripod models; it is not confirmed to work with other tripod brands or models.


